NT-CS20RT UP CUT SAW ROTARY TABLE

Share This

The NT-CS20RT Up Cut Saw is a powerful upcut with 20″ blade and a rotary table allowing it to cut angles in product. Upcut Saws house the blade inside the cabinet of the machine and use a double action cylinder to hold and cut the product safely. The Rotary Table Machines are not hand specific so you can feed parts from the left to the right or the right to the left on the same machine. The Rotary table design allows for the operator to change to specific pinned angles such as 15, 30, 60 and 90degree cuts or anywhere in between by spinning the turret. Using a 20″ diameter blade the CS20RT has a wide range of cut capability from 90-15 degree angles. This machine comes standard with stroke speed control, emergency stop, safety switch, safety enclosure guarding and stroke adjustments for the blade and the top clamp making it ideal for wood and plastic application. The CS20RT has several available options such as two handed cycle operation, infeed/outfeed tables, chromed machine table and safety interlocked cabinet doors for restricted operator access.

MAIN MOTOR HP: 7.5 HP
VOLTAGE, FREQUENCY: 230/460 Volt 60 Hz
PHASE: 3 Phase
AMP REQUIREMENT: 9/18 Amps
APPROVED ELECTRICAL PARTS: CE Approved Components
DUAL VOLTAGE MOTORS: 230/460 Volt
CONTROL VOLTAGE: 24 Volt Control Voltage
PASS-LINE: 34-1/4''
CUTTING ENVELOPE: 1'' x 11-3/4'', 2'' x 11'', 3'' x 10-1/4'', 4'' x 9-1/4'', 5'' x 7-3/4'', 5-1/2'' x 6-3/4''
MAX. WORKING WIDTH: 11-3/4''
MAX. WORKING THICKNESS: 6-1/4''
ABLE TO CUT ANGLE: + - 60 Degrees
ARBOR RPM: 2996 RPM
BLADE SIZE: 20'' Tungsten Carbide Tipped
NO. OF TEETH ON BLADE: 120 Tooth
Log in to view more.
Categories: , ,